How to Replace a UPVC Door Replacement Lock

If the lock on your door is jammed or isn't functioning as it should, you may be looking to replace it. It may seem like a complicated process but it's actually easy and doesn't require the help of the services of a locksmith.

Few basic tools, some patience and a lot of love should be enough. Here's how:

Measure the Door

If you're having trouble locking your uPVC door, or it won't close or lock properly, it may be time to get a new lock. Whether you've recently moved house or a tenant has moved out without returning keys, or your multipoint gear box is showing signs of wear and tear, it's simple to change the barrel on your lock to one that is new and provides an extra layer of security.

You'll need to take measurements prior to purchasing an entirely new lock. This will ensure that the new cylinder will fit properly and not affect your home's security. The backset is the most crucial. This is the distance that lies between the centre of the keyhole bore hole and the edge of your door. It's usually 2 3/8 or even 2 3/4 inches. Use rulers or measuring tapes to measure this, and then record the results on paper or a notepad.

It is also important to be aware of what the faceplate's thickness is. This is the amount of thickness the faceplate covers the lock mechanism. If you can, buy an alternate lock manufactured by the same manufacturer, as they'll be made in the same way. If you are unable to locate the manufacturer's name or mark on the lock, you can measure the width of the cylinder. You can also measure the width of the current cylinder by placing a pencil over the keyhole.

Once you have the dimensions, you can start removing the old cylinder. Begin by loosening the screw holding the handle in place with a Phillips-head driver. Then, loosen the screws holding the interior and exterior handles to one another. After these screws have been removed, you are able to remove the barrel screw on the exterior handle. Then remove the cylinder.

If the cylinder is stuck in the lock, try using WD-40 or another lubricant to help get it out. It's important not to force it out - excessive force can damage the internal gearbox and cause further issues with your lock. Consider upgrading to a lock that comes with anti-snap and anti-bump security. This will make it more resistant to attacks by thieves.

Source the Lock

Whether you're replacing a patio door lock an old lock following a burglary, or upgrading for greater security There are some things to consider when choosing a new door lock. Make sure you've got the proper size cylinder for your door, and ensure you're purchasing from a trusted brand to ensure a proper fit and high-quality. You'll need some basic tools to complete the task, including the screwdriver and a rubber mallet.

There are many signs that your lock made of upvc is wearing out and must be replaced. Common problems are visible damage to the lock or a handle that is loose and not fitting correctly. If the lock is jamming, or isn't locking at all, it's time for a replacement upvc door lock.

Once you've found the right lock, it's important to get it installed correctly so that it functions properly and locks securely. Follow the manufacturer's directions when installing the multipoint lock mechanism into the upvc panel. Attach the proper faceplates, handles and other components. Once everything is in place check the mechanism by locking and unlocking the door from both inside and out. When you've finished the job, it's time for celebration.

A door lock made of upvc may sound intimidating however, it's an simple DIY project that can be done without the assistance of a locksmith. By recognizing the indications that your lock is in need to be replaced and having the necessary tools available it's a relatively simple process.

Keep in mind that just like any other moving part the door lock made of upvc can benefit from some lubrication to ensure it runs smoothly. A few sprays of silicone or a graphite powder lubricant will aid in prolonging their life by ensuring they are free of excessive friction that could cause premature wear and tear. Regular cleaning with a damp sponge and WD-40 can also aid in keeping your door lock mechanisms in top condition.

Take out the Cylinder

It could be time to replace the lock barrel if you are having problems with your Upvc door. This is a simple DIY project that can be completed in just a few moments and is a great way to maintain your home's security. The most important part of this process is identifying the manufacturer of the lock that you currently have to be able to find an appropriate replacement.

A damaged door lock could be a real hassle and a significant security risk. Locks on uPVC doors are susceptible to malfunction, so it's important that you maintain them regularly. In fact, experts recommend that you replace patio door lock your lock every seven years. However, if your lock is suffering from severe damage or you're not happy with its performance, it's certainly worth considering professional help from an expert.

In most cases, a simple pin-based system, referred to as a euro cylinder is used for uPVC doors. They are simple to use and are not likely to fail, but they can be vulnerable. It is therefore recommended to replace your lock with a more modern lock that is equipped with anti-snap, anti-bump and anti-snap security to stop burglaries.

The first step in changing your uPVC locks is to take off the handle. This will expose the old cylinder. This can be a little difficult as there are typically some screws hidden beneath the handles, so make sure you have a screwdriver on hand. The next step is to gently pull and wiggle the cylinder until it loosens. When it is loose then you can remove it out of its socket.

If you find an appropriate replacement patio door lock, simply screw it in and reverse the removal process. Be careful not to over tighten as this can cause the cylinder to become stuck in the door and not function as it should. Test the uPVC replacement lock by opening it and closing it from both sides. It should be able to lock and unlock the door using your key. If not, ensure that the screws are tightened, then try again.

Install the Lock

You'll need to do a bit of research first to make sure that the lock you pick is appropriate for your door. You will have to know your backset and faceplate dimensions - the distance between the edge of the front door and the center of the handle/cylinder with the lock type in order to ensure that the new lock fits correctly without compromising security.

Once you've finished that, you can start installing the new lock. Ideally, prop the door open or secure it to ensure that it doesn't shut during the process. First, loosen the screws that hold the handle in place using a Phillips-head screwdriver. After they've been removed you should be able to pull the inner and outer handle apart.

The next step is to remove the old cylinder. This is something you'll want to do by unscrewing it from its barrel. After removing the cylinder install the new lock. Be sure to adhere to the guidelines that are specific to your model. Once it's in place, you can test the new lock by opening and closing the door from the inside and outside, locking and unlocking it from inside, and then retesting it.

There are a number of reasons you may need to change the locks on your uPVC door. It could be because you recently moved in and don't have a key, or that the previous tenant didn't return it or you may prefer the most secure lock. It isn't going to take more than five minutes to change the lock cylinder.

No matter if you have a multipoint lock or a single-point lock, they all work using the same mechanism. This means that they can be prone to problems at times, such as failing to close or getting stuck. These can be caused by wear and tear, weather conditions, or simply due to daily usage. Most of these problems are easily solved with a bit of maintenance or by contacting a locksmith.