Sliding Patio Doors Repair

Sliding patio doors are a great way to enjoy your outdoor space, but they can become difficult to open or close. This could be due to a range of issues, such as dirty tracks or misaligned rollers.

Clean the track and Lubricating the rollers. You can also use the adjustment holes on the bottom of the movable panel to re-align your rollers.

Track that is damaged or dirty

A damaged or dirty track can cause the door to not move properly. Over time dirt and grit, as well as rust can build up, preventing the track from moving smoothly. The solution is a thorough cleaning using an abrasive and mild detergent. This job should be done regularly to ensure smooth operation and to make sure that costly repairs are not required in the future.

A leaking door can also be a frequent issue. It needs immediate attention to prevent structural deterioration, water damage and the growth of mold. The problem is usually caused by worn weather stripping and misaligned door. This can be corrected by replacing the old weather stripping and aligning the doors.

Another issue that is common and can be resolved with some DIY work is when rollers jump off their tracks. This task can be difficult so you should ask a trusted friend to help you. Sit inside the house and lean a panel toward you to reposition the rollers. To prevent the panel from falling, place it on sawhorses when it's been lifted off the bottom track. Then, loosen the roller's screws and remove them with a screwdriver. Then, you can clean any dirt stuck between the wheels and tracks. Then, clean each wheel by rubbing denatured alcohol on a rug. Reposition the wheels to their tracks and then attach them again.

It's possible to straighten bent sections of track with a mallet made of rubber and a piece of wood. However in the event that the bent portion is close to the hinges and has the potential to cause further damage, you'll be better off calling an expert for safety reasons.

Rollers that are misaligned

If your sliding door has difficulty sliding, it is likely that the roller wheels are not aligned correctly. The wheels could be dirty or rusted and their bearings are worn down. This causes friction between the bottom of the door and the track, causing it to grind or snag when it's opened or closed. This can also trigger squeaking sounds.

Fortunately it's an easy fix. You don't need to remove the door to access the wheels, since they are mounted on a bracket that's adjustable. Use a screwdriver and locate the adjustment holes on the frame (usually on either side). Rotate the screws to turn the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise turn lowers it. Continue to adjust the door until it is open and shuts easily.

It is essential to adjust the wheels prior adjusting the latch. In order for the lock to function properly the latch hooks have to be aligned with the strike plate. If you don't do this, the latch could shut or open while you're away from the room.

Sliding patio doors are an investment, and ensuring they are functioning correctly helps keep your family safe and secure. By addressing common issues like broken tracks, rollers and handles, you can prevent expensive repairs in the future. Contact us for more information on patio doors. We can assist you in keeping your sliding patio doors in top condition by assessing your repair needs. Our experts can also assist with any replacement parts that you may need.

Damaged or loosely hung door frame

Sliding patio doors make a fantastic addition to any home. They offer an attractive and convenient alternative to swing-open or hinged patio door options. However, like any other hardware that they are, they could face various issues over time. Fortunately, most of these issues are easy to fix using a bit of DIY knowledge.

A gap in the frame is a typical issue with sliding patio sliding doors repair doors. It could be caused by a variety of reasons, including a an improperly aligned track or rollers or a damaged track door, or a bowed door frame. Most of the time, the cause of this issue is easily remedied by removing the door and re-attaching the track or rolling elements. This must be done with caution to avoid harm the track or frame.

In some instances, it might be required for the entire track to be replaced. This can be accomplished quickly and easily with the universal kit that is available in all major hardware stores. These kits are simple to install and will have your door operating correctly in no time.

It is important to regularly inspect the frame of your sliding door and hardware for signs of wear and tear, like loose screws or bolts. This is an easy and effective DIY patio maintenance procedure that can be done with a screwdriver. Additionally, it is important to oil your tracks and rollers to facilitate smooth operation and prevent premature wear.

Patio doors are usually the primary entrance to the backyard and outdoor living space for many homeowners. Therefore, they have to be able to function properly in order to maintain the comfort of their homes and provide security. If you follow these easy DIY maintenance techniques, homeowners can prolong the life of their sliding patio glass repair near me door and save money on repairs or replacements.

A faulty handle

The sliding patio door glass repair near me doors are ideal for allowing you to get into your home and get access to your backyard, however they can be difficult to operate when they become misaligned. A faulty handle may also cause the door not to open or close properly. The good news is that repairing a loose handle is a relatively simple task that can be completed at home.

In many cases the loose grip is a result of screws that have slipped out of the backplate. To remedy this problem just tighten the two screws on the inside of the handle using the help of a screwdriver. If the handle is still loose, it could be an indication that the threads have worn away and require replacement.

Or, a damaged latch might be the culprit. It is more likely to occur if the latch made of plastic, not metal. Try applying lubrication to the latch to see if it's not catching, or turning. If this does not work, you may need to replace the lock.

If the handle is damaged or broken, it may be difficult to use. If this is the case, it will be necessary to replace it with a brand new handle that matches the style of your sliding patio door.

Feldco can help you restore your patio doors back to their former glory, whether they are brand new or old and old-fashioned. We offer a broad selection of high-quality patio doors in various sizes and styles. Contact us today to find out more about our products! We are proud to serve homeowners in Southern California, including Ventura County, Orange County & San Diego County.

Weatherstripping that isn't working properly

It's time to upgrade your weather stripping if you see light around closed windows and doors or sense a draft pulsing towards the door or window. These strips create an airtight seal, which stops unwanted water, air, and pests from entering the home. This helps keep your heated and conditioned air inside, saving money on energy costs.

It may have lost its strong, bouncy seal due to age. It is easy to identify this by running a dollar bill under the seal on the top and bottom of the jamb and the door frame where they meet. If the dollar bill slides easily between the seal and the door, it's time to replace the weather stripping.

If you only replace the worn-out portion of weather stripping, this could result in future issues with the seal. It is much more effective to replace all the stripping. This will allow you to rest sure that your door will be sealed properly.

To make a DIY project that is simple take a look at our weather stripping project guide to remove the old weather stripping. Then, you can apply the correct material on your sliding patio door and frame to ensure a long-lasting, tight seal. It's a great way to repair your door and cut your energy bills Don't delay until it's too late. Your wallet and your home will be thankful.