Sliding Patio Doors Repair

It is possible for sliding patio doors to become difficult to open and close. This could be due to a number of issues, including dirty tracks or rollers that are not aligned properly.

Clean the track and lubricating the rollers. You can also utilize the adjustment holes on the lower part of the movable panel to adjust the alignment of your rollers.

Track that is damaged or dirty

A dirty or damaged track can cause a sliding door to not slide properly. Over time dirt, grit and even rust can build up and stop the track from moving smoothly. The solution is a thorough cleaning with an abrasive and mild detergent. It's best to perform this task regularly to ensure the smooth operation of your door, and to avoid the need for costly repairs later on.

A leaky door is a common problem that requires immediate attention to avoid water damage, mold growth and structural deterioration. The issue is usually caused by worn weather stripping and a misaligned doors. This can be rectified by replacing the old weather stripping and aligning the doors.

Rollers that veer off the track are another problem that is often fixed with some simple DIY work. This can be a difficult task, so ask a friend to assist you. To reposition the rollers to the right position, sit inside the house and lean one of the panels toward you. After lifting the panel off the bottom track, it's time to place it on sawhorses in order to stop it from falling off. Then, loosen each roller's screws and then pry them out using a screwdriver. You can now clean any dirt that is caught between the wheels and the tracks. Clean each wheel with denatured alcohol on a cloth. Reposition the wheels to their tracks and then attach them again.

It's possible to straighten bent track sections with a mallet made of rubber and a block of wood. If the bent section is near hinges or is likely to cause more damage, you should contact an expert.

Rollers that are misaligned

If your sliding patio door repairs near me door is sliding poorly it's most likely due to the roller wheels aren't aligned with the track. The wheels could be dirty, rusted or their bearings worn out. This friction causes the door to catch and grind when it is opened or closed. It also makes squeaking noises.

This is a straightforward fix. The wheels are mounted on an adjustable bracket that can be adjusted, so you don't need to remove the door. Locate the adjustment holes (usually on the opposite side of the frame) and utilize a screwdriver for turning the screws that control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise movement lowers it. Continue to adjust until the door moves smoothly and quietly when open or closed.

It's important to adjust the wheels prior making adjustments to the latch. The latch hooks need to line up with the strike plate (the opening into which the latch locks) to allow the lock to work correctly. If you don't, the latch may open or close while you're not in the room.

The sliding patio doors are an investment. Maintaining them in good working order will keep your family safe. You can avoid future expensive repairs by fixing common issues like faulty rollers, tracks and handles. Contact us to learn more about patio doors. We can assess your sliding patio door repair needs and help you keep it in good condition. Our professionals can also assist with any replacement parts you may need.

Damaged or loosely held door frame

Sliding patio doors make a fantastic addition to any home. They provide a stylish and practical alternative to swing-open or hinged patio door options. Like any other hardware item sliding patio doors may become problematic over time. Many of these issues can be fixed with a little DIY expertise.

A gap in the frame is a common issue with sliding patio repair near me doors. It could be due to a number of factors, such as a misaligned track or rollers or a damaged track door, or a bowed door frame. In the majority of cases the reason for this problem can be easily fixed by taking the door off and reattaching the track or rolling elements. It is essential to be careful not to cause damage to either the frame or the track.

In certain instances it is necessary to replace the entire track, which can be done easily with an universal replacement kit that is readily available at major hardware stores. These kits are easy to install and will have your door operating properly again in no-time.

Check your sliding door hardware and frame for signs of wear, such as loose bolts or screws. This is a simple and efficient DIY patio maintenance step that can be done with the help of a screwdriver. In addition, it is essential to lubricate your rollers and tracks to make sure they operate smoothly and to prevent premature wear.

Patio doors are typically the main entrance to the backyard and outdoor living area for a majority of homeowners. They need to to function correctly to ensure the comfort of their home and provide security. By following these simple DIY maintenance tips, homeowners can extend the life of their patio door and cut down on costly repairs or replacements.

A faulty handle

Sliding patio doors are the perfect way to access your backyard and also enter your home, but they aren't always easy to operate if they become damaged or misaligned. A defective handle can cause the door not to shut or open properly. Repairing a damaged handle can be done at home.

In many instances the loose grip is a result of screws that have fallen out of the backplate. To fix the problem, tighten the screws that are on the inside of the handle using the help of a screwdriver. If the handle is loose, it could be a sign that the threads have worn away and need to be replaced.

A broken latch could also be the reason. It is more likely the latch will break if made of metal instead of plastic. Try making sure the latch is lubricated to see if it's not engaging or turning. If this doesn't work, you may have to replace the lock.

If the handle is cracked or broken, it could be difficult to use. If this is the case it is necessary to replace it with a new handle that matches the style of your sliding patio glass door repair near me door.

Whether your patio doors are outdated and old or new, Feldco can help you get them back on the right track. We have high-quality doors available in various sizes and styles that can be fitted to perfectly fit your home. Contact us today to learn more about our products! We are proud to serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.

Unusual Weatherstripping

It's time to upgrade your weather stripping if see light in the windows and doors or feel a draft pulling at the window or door. These strips create a tight seal that keeps unwanted air, pests, or water from getting into your home. They also help keep your conditioned and heated air inside, saving you money on energy bills year-round.

Depending on the age of your weather stripping it could have deflated and lost its bouncy, positive seal. It is easy to identify this by running a dollar bill under the seal at the top and bottom of the jamb as well as the door frame where they meet. If the dollar bill slides easily between the seal and the door is the time to replace the weather stripping.

If you only replace the worn-out section of weather stripping, it could cause problems in the future with the seal. It's more efficient to replace the entire stripping to ensure that you are able to rest that your door is sealed once again.

To make a DIY project that is simple, follow our weather stripping project guide to remove old weather stripping and install the right material to your sliding patio door and frame to create a durable solid, secure seal. It's a great option to repair your door and cut your energy bill Don't put off the project until it's too late. Your wallet as well as your home will be thankful.