Locked Keys in Car? Here's how to open a car door without key to Open Your Car Without Damage

Don't panic if your car lockouts has locked the keys in your vehicle. There are numerous tricks you can try before calling a locksmith or a roadside assistance service.

For example, you can make use of a shoelace with a slip knot to tie up an old post lock or a wire coat hanger that you untwist and shape into hook. You can also make use of a door wedge or an inflatable wedge.

Pump Wedge

If you've been stuck in a locked car and no DIY solutions like wire hangers, shoestrings or wedges work for you then it's time to call a professional. A locksmith or repo service provider might have specialized tools for unlocking that can allow you to unlock your car without causing any damage.

If they do, make sure you use them correctly. Most importantly, know where to place the wedge tool. A lot of people place the wedge tool in the top corner of the door which is the most vulnerable. This is a bad move because you could damage the weather stripping and wires within the doors. Instead, place the wedge in the biggest portion of the gap that is visible and where it will have maximum leverage.

The Pump Wedge is an inflatable wedge made of durable vinyl that will not damage the surface. It is able to slide between the door of the vehicle and the door frame. It is pumped up to create a separation which allows you to slide in other tools such as a long reach car opening tool rod. It comes with a hook at one end that you could shape in order to grab the latch on the door handle.

A less costly version of this is a pair made of wooden door stops. They can be put on the rear of the door to open the space wide enough to accommodate rods. You can also try using a slim jim which is a thin metal strip that can be bent into a hook that can be used to latch to the lock and then pull it up. This method isn't without practice, however, since you need to be careful not to tear the door's weather stripping.

A shoelace is a good option, but it works only on older vehicles that do not have a push button for unlocking. You can tie a slip knot in the middle of the lace, and then move it upwards and downwards through the door's seam until it reaches the latch. Then, you can move the lace until it catches the lock, then tighten the slip knot and pull upward. This method is more difficult than other methods, and it may scratch paint or damage the door trim if you're not cautious.

Inflatable Wedge

If you own a wedge-shaped inflatable car door opener, you will be able to easily unlock a car service your vehicle without the necessity of prying or slim jim tools. These wedges for car doors can be placed between the window and the frame of the vehicle, and when they are inflated, they create a space enough to fit a long-reach tool such as a slim jim or a button grabber. This method is far safer than using a prying tool and is a viable option even when you don't have access an screwdriver.

Another good option for unlocking a car without damaging its exterior or interior is to use a wire coat hanger that has been shaped into a hook. This can be used to grab the lock and could work better than the flat screwdriver as it is less likely cause damage to the paint of the car. However, it is important to check all of the doors to ensure there is no other method to gain access.

You can also try a plastic bag that has been bent into a noose-like or v-shaped shape, but you'll need to be careful not to tear it, as it could make your situation worse. This method is particularly useful if you can't find the lock button. This method isn't as efficient as a wedge, or a coat hanger, but it can aid you in a pinch.

Stay calm and put safety first. There are many ways to solve this problem. If you have read this article, you'll be prepared for any scenario that may occur. You can unlock your vehicle by following our steps. This will prevent any unnecessary damage and stress. Of course, if you're able to, make certain to have your keys when leaving your vehicle.

Shoelace

It's one of those "oh crap!" moments that can make a day miserable. In a pinch, it's a good idea to keep a few items in your possession that can help you unlock your vehicle without breaking the windows. These items are readily available and will save you money on locksmiths, or the time it takes for roadside assistance.

A twine or shoelace can be used to unlock a vehicle. It's simple to use and will work on a variety of cars. The key to this method is a car that has post locks. They stack vertically on the window sill and are easily accessible from outside of the car. To accomplish the task make use of a shoelace create a slip knot, then wiggle it into the crack between the door and window frame. Once the slip knot is set and secured, pull both ends the string upwards in order to lasso the lock.

This method is only applicable on older models with a locked that is hooked. If you have a screwdriver on hand to use, you can use it to open the door more aggressively. You can also use a rod that you can take from a nearby item, such as the door frame, or an object of wood how to get your keys out of a locked car attach to the window frame. This will create space for rods to push the interior locking button.

While the methods mentioned above are generally safe for the majority of drivers, it's advisable to call for assistance whenever possible. This will stop any further damage to the vehicle and it can also lower the risk of an accident that is caused by the stress of the situation. If you don't have a phone with a mobile number or cannot call for help it is essential to always let trusted family members and acquaintances know where your vehicle is. A spare set of keys should also be kept in a secure location on your vehicle.

Wire Hanger

It's a gruelling situation to lock your keys inside your car. The trick is to remain at peace and think through all options rationally. This will help you avoid making the problem worse which can occur if you panic.

You can also use a modified wire hanger for entry into your car. You will need to uncoil the coat hanger to ensure that it has a straight edge and a hook, which you can use to move the lock rod inside your door. When you are able to reach the lock rod, you should be able pull it up to open the door.

Another option you could try is using a rod, or even the metal of your car's body. It is crucial to ensure that you don't cause any harm to the vehicle during this procedure, and it is best to do this without taking the car apart. Also, try to be as patient as you can as this method is likely to be more effective on older cars than on newer ones, although it can still be utilized in the case of a model that has a unique exterior door handle design.

You can also use a shoestring as well as an slip knot to accomplish the same thing. This can also be done on a post lock, however it is a bit more difficult to maneuver since you will depend on the tension of the string to grasp the lock. You can accomplish this by threading a shoestring into the small hole in the weatherstripping of the doors of your vehicle. After the shoestring has passed through the weatherstripping, pull the string tight to create a tight loop that snaps around the lock. This method is extremely effective if you are lucky enough to find the lock in the proper spot.