How to Replace Door Handles

The door handles of your home are an essential element of your design. A new handle can elevate your home's decor and bring your decor to the present.

Over time the knobs on your door may become stiff or even break. These are indicators that it's time to replace the knobs. This guide will help choose the correct door handle replacement for your home.

Door Knobs

upvc door handle repairs near me handles enhance the appearance of your house while making it easier for people to open and shut doors. They are available in a variety of finishes, colors and types to match your decor. If yours are starting to appear worn or just need an upgrade, replacing them is relatively simple and can be completed in just a few steps.

You must locate the spindle, or shaft, through which the knob is inserted to the door. Some knobs have a tiny opening that can be used with an screwdriver to take out the set screws that hold the handle in place. Some have a slot or hole in which can be used with the flathead screwdriver on a spring-activated nut, known as a detent. When you press the pin it opens the latch mechanism and allows you to pull or push the knob.

Once you have the spindle, or shaft in your hand take the knob off and replace it. Make sure it is aligned correctly and ensure that the latch functions properly before tightening the new set screws.

After you've replaced the knob, put the rod for latching over the door's hole and interlock it with the rod mechanism on the second knob. Make sure the holes are lined up, then thread in the screws for the latch plate and tighten them.

Some people choose a smooth or brushed metal finish for the door hardware to give their home a modern and sleek appearance. It will complement their other furniture. Some prefer a rustic design that goes well with farmhouse-styled rooms. If you have one of your family members with mobility issues, you might prefer a lever style or rim lock that requires less pressure to operate.

Other factors are being looked at more and more when it comes to the design of Double Glazed Door Handle Repair handles. Infection control and accessibility are the main issues that have led to the development of new designs for handle handles, such as ones which can be operated by the forearms of a person.

Latch

The latch that keeps your door handle open is prone to wear and tear due to the wear and tear of use. It is simple to change the latch on your door handle. This will result in an enormous difference in the way it opens and closes.

Depending on the kind of knob you are using the latch could be a part of the knob itself or it might be an independent piece that is attached to the door itself. In either case, you will follow the same procedure for removing and replacing. It's simple to remove the old latch, especially when you have doors with a "magic" button. The tiny pressure-slot, which is located on the side knob is the one you'll need to press in order to pop the latch out of the handle.

If your handle doesn't have this magic button you'll have to take off the cover plates that are placed over the latch plate. These are usually circular or rectangular and can be removed with a screwdriver. Some have a slot in which you can insert your screwdriver. Other handles simply snap off.

Then, remove the machine screws that attach the inner plate and latch to the door handle. These are the screws with a pointy tip and you'll have to store them in a safe location to use them again in the next steps. Once these are off you can remove the latch plate and mechanism out of the hole in the door and set it aside.

You can now begin installing the new latch. Install the latch plate into the door hole and secure it with the hardware supplied. Make sure that the square pin on the interior of the latch faces the latching mechanism inside the handle and aligns with the other screw holes in the handle. Then, secure the exterior latch plate using the screws supplied.

Strike Plate

It is not uncommon to replace a door handle if it feels loose, or does not lock properly. This is typically caused by malfunctioning parts of the latching system, such as a striking plate that's either too small or has moved upwards or down on the doorjamb as time passes. This project allows you to replace your old strikeplate with a more substantial one, which can provide better security for your door handle repairs and ensure it stays shut.

To check if the problem is due to the strike plate, apply some lipstick or similar marking material to the bolt that is used to latch. Close the door and attempt to latch it. If the mark is lower than your strike plate hole, it indicates that the plate is too small and the door won't latch. If the mark is above or below the strikeplate hole, the strikeplate has likely been moved up or downward on the doorjamb.

Depending on the door, you may be able to simply install the new strike plate into place over the old one, using the screws that come with it. You may need to first drill holes and then chisel some wood out to ensure a perfect fit. If this is the case, you must be careful not to chisel too hard or you'll ruin the integrity of your doorjamb.

You can also try installing a new strike plate which will give the lock a more secure grip on the door and requires more force to open it. It usually requires two longer screws to anchor the strike plate into the frame of the upvc door handle repair. To do this, you'll have to remove the current strike plate and then drill and chisel the wood to make space for the new one.

This hard-to-find strike plate is designed to be used with antique rim locks, and it's made from robust solid brass with a heavy duty thickness. It comes with wood screws and machine screws, ensuring that you have the correct equipment for your task. Keep in mind that wood screws have a pointed point, whereas machine screws are blunter.