Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't rust or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they generally fit into frames of the past easily. However when you have double glazing repairs near me-pane windows that are held in place by internal beading, it'll be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan attempt to remove the window panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor, where they could be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will keep water and drafts from entering your home until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap is large, you might want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of issues like sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll need to open the window so that you can get to the frame. With an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and verify the fit. If you're satisfied with the fit, tighten the screws until they stay in the right place.

If you aren't able to move the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. It is essential to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and do an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is essential to act if you get up each morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the issue the old caulking might need to be removed before a new layer of caulk is applied. It is essential to keep in mind that when it is about uPVC window repairs to double glazing you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes are free of debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It is very easy to replace a hinge on a window, but it's easier if someone else helps you to hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused due to opening the window in the wrong way or a faulty installation in the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It also decreases the risk of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. First, the hinges because of wear and tear, may become displaced, which will cause gaps to develop between the sash and the frame. If they are damaged beyond repair, it may be necessary to have them realigned. In addition, the interlock could be misaligned. This happens on the hinge's side, and could require to be cleaned. In certain instances, it may be necessary to replace these.

The next common cause of draughts is the window seals. These are prone to wear or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repairs to double glazing windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it is cheaper to replace them instead of fixing them. If you are having issues with your upvc windows, it is best to seek professional assistance immediately.